Nantong Yeshun Machinery’s custom hydraulic presses are engineered to solve the unique challenges of special metal forming processes—such as deep drawing (for cylindrical parts like fuel tanks), hot forging (for high-strength components like gear blanks), and progressive stamping (for complex parts like electrical connectors)—scenarios where standard hydraulic presses fail to meet process-specific requirements (e.g., precise pressure control for deep drawing, high-temperature resistance for hot forging). Yeshun’s custom solutions begin with a detailed analysis of the customer’s forming process, including material type (e.g., aluminum alloy for deep drawing, alloy steel for hot forging), part geometry (e.g., 300mm-deep cylindrical shells, asymmetrical gear blanks), and production volume (e.g., 5,000 parts/month for prototypes 100,000 parts/month for mass production. A prime example is a new energy battery manufacturer in South China that needed a custom hydraulic press for deep drawing 2mm-thick aluminum alloy into cylindrical battery cases (with a depth of 200mm and an inner diameter of 50mm). Standard presses struggled with this process, as they could not maintain uniform pressure across the aluminum sheet—leading to wrinkling at the bottom of the cases. Yeshun’s engineering team designed a 300-ton custom hydraulic press with three key modifications: 1) a variable-pressure hydraulic system that adjusts pressure from 80MPa to 120MPa during the drawing process (higher pressure at the start to stretch the aluminum, lower pressure at the bottom to prevent wrinkling); 2) a heated worktable (maintained at 120°C) to improve the aluminum’s ductility; and 3) a servo-driven ram with positional accuracy of ±0.01mm to ensure consistent case wall thickness (tolerance) ±0.05mm). After installation, the press achieved a part qualification rate of 99.2% up from 85% with the standard press, and reduced production cycle time by 15% (from 40 seconds to 34 seconds per case). Another custom application involves a heavy machinery manufacturer requiring a press for hot forging 50mm-thick 42CrMo alloy steel into gear blanks. Yeshun’s custom 1,000-ton press included a heat-resistant ceramic-coated worktable (to withstand 800°C forging temperatures) and a rapid-cooling system (to prevent overheating of hydraulic components during continuous forging). The press also integrated with the manufacturer’s existing forging furnace via a robotic transfer arm—creating a seamless “heating-forging” workflow. While Yeshun’s standard product line covers common forming needs, its custom hydraulic presses demonstrate the company’s ability to address niche, process-specific challenges. For customers with special forming requirements—whether deep drawing, hot forging, or other unique processes—Yeshun’s engineering team provides end-to-end support, from initial process analysis and press design to on-site testing and operator training. Contact Yeshun Machinery to share your specific forming process details, and our team will develop a tailored hydraulic press solution.