Workshop environments—especially small to medium-sized metal fabricators, automotive repair shops, and custom machinery workshops—often struggle with excessive noise from metal processing equipment, which can lead to operator fatigue, compliance issues with occupational health standards (e.g., OSHA’s 90 dBA 8-hour exposure limit), and disruptions to nearby work areas. Nantong Yeshun Machinery’s Low-Noise Plate Rolling Machine (based on our W11 series) is engineered to address this challenge, integrating targeted noise-reduction technologies with the reliable rolling performance of our standard models—achieving an operational noise level of 75-80 dBA, well below industry averages for plate rolling machines (typically 95-105 dBA). The low-noise design of this machine focuses on three key sources of noise: 1) Mechanical transmission noise: The machine's gearbox and drive system uses precision-machined gears (with a surface finish of Ra 0.8μm) and a sound-dampening housing lined with acoustic foam (25mm thick, NRC 0.8). This reduces gear meshing noise by 20-25 dB. The drive belts are made of polyurethane with fiberglass reinforcement, which operates more quietly than traditional rubber belts and minimizes vibration-induced noise. 2) Hydraulic system noise: The hydraulic pump is mounted on a vibration-isolating base (made of natural rubber with a Shore hardness of 50) that reduces noise transmission to the machine frame by 15 dB. The hydraulic lines use flexible, noise-dampening hoses (with a sound-absorbing outer layer) and are routed to avoid resonance, further lowering hydraulic noise. 3) Roll-material interaction noise: The rolling rolls are coated with a thin layer of polyurethane (5mm thick, Shore hardness 90A) that dampens the impact noise of metal plates contacting the rolls. For applications requiring uncoated rolls (e.g., stainless steel processing), we offer a roll vibration-damping system that uses internal springs to absorb vibration during rolling. A small metal fabrication workshop in Canada (with 5 operators working within 5 meters of the rolling machine) recently adopted our Low-Noise Plate Rolling Machine to replace their outdated model, which operated at 102 dBA. Prior to the upgrade, the workshop required operators to wear double hearing protection, and nearby administrative areas reported noise disruptions. After switching to Yeshun’s low-noise model, the operational noise dropped to 78 dBA—allowing operators to use single hearing protection (compliant with OSHA standards) and eliminating disruptions to adjacent areas. The workshop owner stated that “the reduced noise has made a huge difference in operator comfort—we’ve seen less fatigue and higher productivity, and we no longer get complaints from our office staff.” Additionally, the machine maintained the same rolling performance as the old model, processing 3-8mm-thick mild steel plates with a curvature accuracy of ±0.1mm. Our pre-sales service includes a noise assessment of your workshop (via sound level measurements or virtual layout review) to confirm the machine’s noise level will meet your local standards and workplace needs. We also offer optional upgrades, such as a fully enclosed acoustic mask (reducing noise to 70 dBA) for extremely noise-sensitive environments (e.g., workshops adjacent to residential areas). Post-sales support includes training for your maintenance team on preserving noise-reduction components (e.g., replacing acoustic foam, checking vibration isolators) and 24-hour technical support for any noise-related concerns. For inquiries about the machine’s noise level, customization options, or to request a sound test report, please contact our workplace-friendly solutions team.